Products

• Double-walled design. • Inner chamber: Made of (SS 304). • Temperature Range: 5°C above ambient to a maximum of 95°C. • Accuracy: ±0.5°C. Control System: • Digitally controlled temperature system. • Optional Accessory: Pyramid Lid

• Double-walled vacuum oven. • Inner chamber and outer body made of thick stainless steel (SS 304 quality). • High-grade glass wool insulation between chambers to prevent heat loss. Performance: • Ensures uniform drying under vacuum conditions. • Temperature range: 50°C to 200°C with ±2°C accuracy. • Vacuum gauge: 760mm Hg (analog display). Heating System: • Vacuum chamber is wrapped with high-quality heaters for quick and uniform heating. Door Design: • Thick tempered toughened glass window for observation without disturbing internal conditions. • Silicon rubber gasket for perfect sealing. • Proper door alignment ensures excellent vacuum performance and operator safety. • Positive screw mechanism to tighten the lid for a perfect seal. Control System: • Digital temperature indicator-cum-controller. • Control panel on the front with temperature controller, switches, and indicator lamps. • Vacuum control and relief valves located on the front for easy monitoring. Additional Features: • Fitted with diaphragm valves and vacuum gauge. • Operates on 230V AC, 50 Hz supply. • Supplied without vacuum pump.

• Double-walled design made entirely of Stainless Steel 304 Quality. Features: • Equipped with a vacuum gauge. • Includes a vacuum cock. • Fitted with a toughened glass window for viewing. Temperature Control: • Controlled by a microprocessorbased, auto-tune PID digital temperature controller. • Uses a PT-100 sensor for accurate temperature measurement. Vacuum Capacity: • Maximum vacuum: 760mm of mercury (-30°C). Accessories Supplied: • Stainless steel tray. • Vacuum gauge. • Vacuum cock.

• Double-walled unit • Inner chamber: Stainless Steel (S.S.) • Outer chamber: Mild steel with powder coating • Glass wool insulation between walls to minimize heat loss Heating & Temperature Control: • High-grade nichrome wire heating elements • PID microprocessor controller with dual display • Temperature range: 50°C to 250°C (working up to 225°C) • Accuracy: ±0.5°C • Motorized air blower for uniform temperature • Heaters placed on right and left sides (Memmert type units) • Air Ventilation: Top vents to remove hot gases/fumes • Control Panel: Front-mounted switches and pilot lamps • Trays: Standard S.S. wire mesh

• Double-walled design • Inner chamber: Stainless Steel (S.S.) • Outer chamber: Mild steel with powder coating • Glass wool insulation to minimize heat loss Heating & Temperature Control: • High-grade nichrome wire heating elements • Temperature range: 50°C to 250°C (working up to 225°C) • Controlled by PID microprocessor controller • Accuracy: ±0.5°C • Motorized air blower ensures uniform temperature • Air Ventilation: Top vents to remove hot gases/fumes • Control Panel: Front-mounted switches and pilot lamps • Stainless Steel (S.S.) trays Optional Accessories: • Digital timer with temperature controller

Double-walled unit • Inner chamber: Stainless Steel (S.S.) • Outer chamber: Mild steel with powder coating • Glass wool insulation between walls to minimize heat loss Heating System: • High-grade nichrome wire elements • Temperature range: 50°C to 250°C (working up to 225°C) • Heaters placed at bottom (lab-type units) • Air Ventilation: Provided on top to remove hot gases/fumes • Control Panel: Front-mounted switches and pilot lamps • Stainless steel trays Optional Accessories: • Air circulation fan for uniform temperature • Digital timer with temperature controller

Applications: • Laboratory instruments • Jewellery, watches, and precious stones • Electronics and electrical components • Medical and surgical instruments • Machinery parts in shipbuilding and army workshops • Pharmaceuticals and laboratories for solvent degassing, drug mixing, and herbal formulations • Custom/non-standard machines as per client requirements Technology & Features: • High-frequency solid-state circuits • Auto-tuning facility • Operating frequency: 33 ± 3 KHz

• Capacity: Available in 250ml, 500ml, and 1 L flasks • Flask Configuration: Supports 3, 4, or 6 round-bottom flasks Temperature Control: • Single regulator for overall control • Individual regulators and on/off switches for each heating element • Pilot lamps indicate element operation Construction: • Mild steel housing, powder-coated with attractive finish • Glass wool insulation below heating elements • Equipped with two retort rods and a crossbar • Power Requirement: 230V, 50 Hz, single-phase • Note: Supplied without glassware, clamps, and bossheads • Sizes: Various sizes available

Double-walled design • Outer body: Mild Steel (powder-coated) or Stainless Steel • Inner body: Stainless Steel 304 • Special class glass wool insulation to minimize heat loss Heating System: • Special Teflon-coated oil heater made of SS 304 • Temperature controlled by PID microprocessor controller • Accuracy: ±2°C • Temperature range: 50°C to 300°C

• Applications: Lightweight, fastheating equipment ideal for ashing, fusion, igniting, and heat-treating small parts in chemical labs, industrial fields, and colleges Construction: • Outer body and Inner body: Stainless Steel 304 (matt finish) • Uniform heat distribution through all four sides via Kanthal wire elements Temperature: • Maximum: 1050°C • Working: 1000°C • Controlled by digital temperature controller cum indicator • Heating Elements: High-grade Kanthal wire mounted on the muffle • Protection: Solid-state thermocouple fuse safeguards elements against overheating • Control Panel: Fitted on top with indicating lamps and switches • Power Requirement: 230V AC

• Smooth, rounded magnetic stir bar coated with PTFE, ideal for mixing liquids in flat-bottomed containers on magnetic or hot plate stirrers, resistant to chemicals and heat up to 260°C.

• Horizontal Laminar Flow Unit • Pre-Filters: 90% efficiency for 10-micron particle removal • Static Pressure Indicator: Oilfilled manometer • Air Flow Velocity: Horizontal flow at 90 ± 20 feet per minute • Air Circulation: Balanced blowers with direct-driven FHP motor; variable speed based on filter loading • Inner Chamber Sterilization: UV germicidal tube • Illumination: Fluorescent tube light inside the chamber • Noise Level: <60 dB • Operating Voltage: 220–230V AC, singlephase, 50 Hz • Work Surface: Satin-finish stainless steel • Gas Cock: Provided for gas connections • Test Certificate: D.O.P. test certificate available at extra cost