lab equipments

Applications: • Laboratory instruments • Jewellery, watches, and precious stones • Electronics and electrical components • Medical and surgical instruments • Machinery parts in shipbuilding and army workshops • Pharmaceuticals and laboratories for solvent degassing, drug mixing, and herbal formulations • Custom/non-standard machines as per client requirements Technology & Features: • High-frequency solid-state circuits • Auto-tuning facility • Operating frequency: 33 ± 3 KHz

• Capacity: Available in 250ml, 500ml, and 1 L flasks • Flask Configuration: Supports 3, 4, or 6 round-bottom flasks Temperature Control: • Single regulator for overall control • Individual regulators and on/off switches for each heating element • Pilot lamps indicate element operation Construction: • Mild steel housing, powder-coated with attractive finish • Glass wool insulation below heating elements • Equipped with two retort rods and a crossbar • Power Requirement: 230V, 50 Hz, single-phase • Note: Supplied without glassware, clamps, and bossheads • Sizes: Various sizes available

Double-walled design • Outer body: Mild Steel (powder-coated) or Stainless Steel • Inner body: Stainless Steel 304 • Special class glass wool insulation to minimize heat loss Heating System: • Special Teflon-coated oil heater made of SS 304 • Temperature controlled by PID microprocessor controller • Accuracy: ±2°C • Temperature range: 50°C to 300°C

• Applications: Lightweight, fastheating equipment ideal for ashing, fusion, igniting, and heat-treating small parts in chemical labs, industrial fields, and colleges Construction: • Outer body and Inner body: Stainless Steel 304 (matt finish) • Uniform heat distribution through all four sides via Kanthal wire elements Temperature: • Maximum: 1050°C • Working: 1000°C • Controlled by digital temperature controller cum indicator • Heating Elements: High-grade Kanthal wire mounted on the muffle • Protection: Solid-state thermocouple fuse safeguards elements against overheating • Control Panel: Fitted on top with indicating lamps and switches • Power Requirement: 230V AC

• Horizontal Laminar Flow Unit • Pre-Filters: 90% efficiency for 10-micron particle removal • Static Pressure Indicator: Oilfilled manometer • Air Flow Velocity: Horizontal flow at 90 ± 20 feet per minute • Air Circulation: Balanced blowers with direct-driven FHP motor; variable speed based on filter loading • Inner Chamber Sterilization: UV germicidal tube • Illumination: Fluorescent tube light inside the chamber • Noise Level: <60 dB • Operating Voltage: 220–230V AC, singlephase, 50 Hz • Work Surface: Satin-finish stainless steel • Gas Cock: Provided for gas connections • Test Certificate: D.O.P. test certificate available at extra cost

• Vertical Laminar Flow / Clean Bench • Pre-Filters: 90% efficiency for 10-micron particle size removal • Static Pressure Indicator: Oil-filled manometer • Air Flow Velocity: 90 ± 20 feet per minute at discharge • Air Circulation: Balanced blowers with direct-driven FHP motor; variable speed according to filter loading • Inner Chamber Sterilization: UV germicidal tube • Illumination: Fluorescent tube inside the chamber • Noise Level: <60 dB • Operating Voltage: 220–230V AC, single-phase, 50 Hz • Work Surface: Satin-finish stainless steel • Gas Cock: Provided for gas connections • Test Certificate: D.O.P. test certificate available at extra cost

Double-walled design • Inner chamber: Stainless Steel (SS) 304 • Outer chamber: Mild Steel (MS) with powder coating • Glass wool insulation between walls to minimize heat loss Heating System: • High-grade nichrome wire elements • PID microprocessor controller with dual display • Temperature range: Ambient +5°C to 60°C, accuracy ±0.5°C • Heater placement (Memmert type): right and left sides of inner chamber Air Circulation: • Motorized blower for uniform temperature • Ventilation on top sides to remove hot gases/fumes • Controls: All switches and pilot lamps mounted on the front panel • Trays: Supplied with Stainless Steel wire mesh

Double-walled design • Inner chamber: Stainless Steel (SS) 304 • Outer chamber: Mild Steel (MS) with powder coating • Glass wool insulation between walls to minimize heat loss Heating System: • High-grade chrome-plated nichrome wire elements • Heaters located at the bottom (lab-type incubators) • PID microprocessor controller with dual display • Temperature range: Ambient +5°C to 60°C, accuracy ±0.5°C • Air Ventilation: Provided on top to remove hot gases/fumes • Controls: All switches and pilot lamps mounted on the front panel

Double-walled design • Inner chamber: Stainless Steel (SS) 304 • Outer chamber: Mild Steel (MS) with powder coating • Glass wool insulation between walls to minimize heat loss Heating System: • High-grade chrome-plated nichrome wire elements • Heaters located at the bottom (lab-type incubators) • Temperature controlled by thermostat • Range: Ambient +5°C to 60°C • Air Ventilation: Provided on top to remove hot gases/fumes • Controls: All switches and pilot lamps mounted on the front panel • Digital temperature controller cum indicator (accuracy ±0.5°C) • With SS Trays

Construction: • Double-walled unit • Inner chamber: Stainless Steel 316 • Outer chamber: Stainless Steel 304 • Glass wool insulation between walls to minimize heat loss • Heating System: High-grade chrome-plated nichrome wire elements • PID controller with dual display • Temperature range: 50°C – 250°C, accuracy ±1°C • Air ventilation on top sides for removal of hot gases/fumes • Heater placement (Memmert type): right and left sides • Controls: All switches and pilot lamps mounted on the front panel • Trays: Supplied with stainless steel wire mesh

• Applications: Jar test apparatus for water and sewage treatment; used to estimate coagulant dosing (e.g., alum), determine sulfate concentration, and measure suspended matter and colloids • Motor & Speed Control: Electronically controlled variable-speed motor • Speed adjustable from 30–150 RPM, accuracy ±1 RPM • Stirring System: Stainless steel paddles (2, 4, or 6 paddles depending on model) • Each stirring shaft removable without disturbing other stirrers • Jars: 1000ml capacity, 2/4/6 jars per unit • Illumination: Fluorescent tube below translucent acrylic sheet for diffused cold light

• Double-Walled Stirred Water Bath • Inner chamber and lid: Stainless Steel (SS); Outer body: SS304 • Insulation: High-grade glass wool to minimize heat loss • Temperature Control: Range: Ambient +5°C up to 98°C • Digital temperature controller and indicator with ±0.5°C accuracy • Stirring Mechanism: High-speed motorized stirrer (1/20 HP) for uniform temperature and continuous agitation • Ensures even heating throughout the chamber • Heating: Fast heating system with set of heaters • Operates on 230V AC • Power Requirement: 230V AC