Products

• Cylindrical magnetic stirring bar featuring a molded center ring with an Alnico V magnet. • Fully encapsulated magnets ensure leak-proof, seamless construction. • Polished surface delivers excellent centering and smooth rotation. • Designed for universal applications across various stirring needs. • Resistant to virtually all chemical attack and temperatures up to 260°C.

• Vertical Laminar Flow / Clean Bench • Pre-Filters: 90% efficiency for 10-micron particle size removal • Static Pressure Indicator: Oil-filled manometer • Air Flow Velocity: 90 ± 20 feet per minute at discharge • Air Circulation: Balanced blowers with direct-driven FHP motor; variable speed according to filter loading • Inner Chamber Sterilization: UV germicidal tube • Illumination: Fluorescent tube inside the chamber • Noise Level: <60 dB • Operating Voltage: 220–230V AC, single-phase, 50 Hz • Work Surface: Satin-finish stainless steel • Gas Cock: Provided for gas connections • Test Certificate: D.O.P. test certificate available at extra cost

Double-walled design • Inner chamber: Stainless Steel (SS) 304 • Outer chamber: Mild Steel (MS) with powder coating • Glass wool insulation between walls to minimize heat loss Heating System: • High-grade nichrome wire elements • PID microprocessor controller with dual display • Temperature range: Ambient +5°C to 60°C, accuracy ±0.5°C • Heater placement (Memmert type): right and left sides of inner chamber Air Circulation: • Motorized blower for uniform temperature • Ventilation on top sides to remove hot gases/fumes • Controls: All switches and pilot lamps mounted on the front panel • Trays: Supplied with Stainless Steel wire mesh

Double-walled design • Inner chamber: Stainless Steel (SS) 304 • Outer chamber: Mild Steel (MS) with powder coating • Glass wool insulation between walls to minimize heat loss Heating System: • High-grade chrome-plated nichrome wire elements • Heaters located at the bottom (lab-type incubators) • PID microprocessor controller with dual display • Temperature range: Ambient +5°C to 60°C, accuracy ±0.5°C • Air Ventilation: Provided on top to remove hot gases/fumes • Controls: All switches and pilot lamps mounted on the front panel

Double-walled design • Inner chamber: Stainless Steel (SS) 304 • Outer chamber: Mild Steel (MS) with powder coating • Glass wool insulation between walls to minimize heat loss Heating System: • High-grade chrome-plated nichrome wire elements • Heaters located at the bottom (lab-type incubators) • Temperature controlled by thermostat • Range: Ambient +5°C to 60°C • Air Ventilation: Provided on top to remove hot gases/fumes • Controls: All switches and pilot lamps mounted on the front panel • Digital temperature controller cum indicator (accuracy ±0.5°C) • With SS Trays

Construction: • Double-walled unit • Inner chamber: Stainless Steel 316 • Outer chamber: Stainless Steel 304 • Glass wool insulation between walls to minimize heat loss • Heating System: High-grade chrome-plated nichrome wire elements • PID controller with dual display • Temperature range: 50°C – 250°C, accuracy ±1°C • Air ventilation on top sides for removal of hot gases/fumes • Heater placement (Memmert type): right and left sides • Controls: All switches and pilot lamps mounted on the front panel • Trays: Supplied with stainless steel wire mesh

• Applications: Jar test apparatus for water and sewage treatment; used to estimate coagulant dosing (e.g., alum), determine sulfate concentration, and measure suspended matter and colloids • Motor & Speed Control: Electronically controlled variable-speed motor • Speed adjustable from 30–150 RPM, accuracy ±1 RPM • Stirring System: Stainless steel paddles (2, 4, or 6 paddles depending on model) • Each stirring shaft removable without disturbing other stirrers • Jars: 1000ml capacity, 2/4/6 jars per unit • Illumination: Fluorescent tube below translucent acrylic sheet for diffused cold light

• Double-Walled Stirred Water Bath • Inner chamber and lid: Stainless Steel (SS); Outer body: SS304 • Insulation: High-grade glass wool to minimize heat loss • Temperature Control: Range: Ambient +5°C up to 98°C • Digital temperature controller and indicator with ±0.5°C accuracy • Stirring Mechanism: High-speed motorized stirrer (1/20 HP) for uniform temperature and continuous agitation • Ensures even heating throughout the chamber • Heating: Fast heating system with set of heaters • Operates on 230V AC • Power Requirement: 230V AC

• Applications: Biological Oxygen Demand (BOD) determination, general incubation, serum studies, enzyme assays • Mobility: Castor wheel mounted for easy movement • Construction:Double-walled cabinet • Inner chamber: Stainless Steel 316 • Outer chamber: Stainless Steel 304 • PUF insulation for thermal efficiency • Door: Full-length inner glass/acrylic door for observation without disturbing temperature Flush-fitting, insulated, double-walled with magnetic gasket • Temperature Control:Digital temperature controller and indicator • Range: 5°C – 60°C, accuracy ±0.5°C • Refrigeration evaporator, heater, and air circulator for uniform temperature • Illumination: Door-operated internal lamp • Air Circulation: Fan ensures uniform airflow throughout the chamber • Shelving: Modular, removable SS shelves for flexible specimen arrangement • Compressor: Hermetically sealed, CFC-free • Power Requirement: 230V AC • Single-channel or fourchannel datalogger

• Macro Fluorescence Cuvette (Four polished windows) • Material: UV-grade quartz or optical glass with four polished transparent sides • Design: Square or rectangular cells for excitation and emission light paths • Feature: Low intrinsic fluorescence to reduce background interference • Use: For fluorescence intensity, polarization, and lifetime measurements • Applications: Protein and DNA analysis, FRET studies, environmental testing and pharmaceutical research

• Glass (OG/OS) (340nm~2500nm) • Material: Optical Glass (Borosilicate or Standard Glass) • Wavelength Range: 320 nm – 2,500 nm (Visible to Near-Infrared) • Applications: Colorimetric assays, routine laboratory analysis, water quality testing. • Features: Cost-effective, excellent optical clarity, suitable for general purpose spectroscopy.

• Applications: Biological Oxygen Demand (BOD) determination, general incubation, serum studies, enzyme assays • Mobility: Castor wheel mounted for easy movement • Construction: Double-walled cabinet • Inner chamber: Stainless Steel 304 • Outer chamber: Mild Steel (MS) with powder coating • PUF insulation for thermal efficiency • Door: Full-length inner glass/acrylic door for observation without disturbing temperature • Flush-fitting, insulated, double-walled with magnetic gasket • Temperature Control: PID temperature controller and indicator Range: 5°C – 60°C, accuracy ±0.5°C • Refrigeration evaporator, heater, and air circulator for uniform temperature • Illumination: Door-operated internal lamp • Air Circulation: Fan ensures uniform airflow throughout the chamber • Shelving: Modular, removable SS shelves for flexible specimen arrangement • Compressor: Hermetically sealed, CFC-free • Power Requirement: 230V AC